0917 843 9600Call 0917 843 9600Get a free quote

Walk-in freezer in the Philippines, built for your product

A walk-in freezer holds meat, fish and frozen food well below zero. As a walk-in freezer supplier and installer, BRNG builds with thicker PU panels, insulated freezer doors and refrigeration units matched to your load.

Stacked refrigeration condensing units on pallets in the BRNG warehouse
Typical temperature
-18 to -25 °C
Typical PU panel
100 to 150 mm

Why freezer rooms need more care

The gap between outside heat and inside cold is much larger in a freezer, so weak joints, thin panels and the wrong door cost you every month in electricity and ice build-up. We specify heated doors where frost is a risk, and thicker panels where the load calls for them.

Refrigeration that fits

Our refrigeration units use Bitzer and Copeland compressors, and include the oil separator, accumulator, receiver tank, filter drier, sight glass, high and low controls and control panel.

Quote my walk-in freezer

Sliding insulated freezer door on a track in a white panel wall
Sliding insulated door on a white panel wall.

Use a walk-in freezer for these products

  • Cold room for meat and poultry
  • Cold room for fish and seafood
  • Frozen food distribution
  • Freezing and processing services
  • Commissaries and restaurant chains
  • Walk-in freezer for pharmaceutical products, at your specified temperature

See related BRNG work

All projects
  • Crew laying PU board insulation on a cold store floor
    JM Processing and Freezing Services, Inc.Makati City

    Supply and installation of PU board insulation.

    Insulation
  • White PU wall panels and sliding door inside a slaughterhouse in Tarlac
    Zuru Agro Industrial Corp.La Paz, Tarlac

    Supply and installation of wall and ceiling using PU sandwich panels for a slaughterhouse.

    PU install

Get walk-in freezer answers

How much is a walk-in freezer in the Philippines?

Walk-in freezer price depends on room size, temperature, panel thickness, door type and refrigeration capacity. Send your size and location for a quote.

What temperature does a walk-in freezer run at?

Most run around -18 to -25 °C. Your product and any applicable rule set the actual temperature.

What panel thickness does a walk-in freezer need?

Typically 100 to 150 mm of PU or PIR. The final figure depends on target temperature and heat load.

Do I need a heated door?

Often, on freezer rooms, because heat in the door frame helps stop the door freezing shut. Our insulated doors are available heated or non-heated.

Tell us about your walk-in freezer.

Send your room type, location and rough size, and attach any drawings. We will confirm the details and send a free quotation.

0917 843 9600 / 0933 826 6670